Welcome to the EP 2.0 #brass #annealer that can #anneal from 300blk to 50bmg without having to add OR remove any parts! Adjust from cartridge to cartridge in less than 30 seconds! The perfect fit for the #precision #reloader that typically reloads less than 200 pcs of brass in a single reloading session. Typical cartridges such as .223 to .308 parent cartridges (such as 6.5 creedmoor, 6 creedmoor, .243) usually take about 5 to 6 seconds in the EP 2.0 annealer to be annealed depending on the amount of heat you have coming out of your torch head. For pure example, 50 total pcs of 6.5 creedmoor brass x 6seconds = 300seconds / 60seconds in a minute = only 5 minutes per 50pcs! It really doesn't take that long! By the time you load a hopper, you're already a 1/4 of the way through your annealing session! In our opinion, if you're feeding the machine, you're still feeding the machine regardless if it's an adjustable fence OR a hopper,,, and why the EP 2.0 annealer is what it is = EASY, FAST and takes up VERY LITTLE SPACE on your reloading #bench! For the precision reloader, especially those that reload in small batches of 50 to 100pcs, the EP 2.0 annealer is PERFECT FOR YOU! Definitely if you're are going to anneal a wide array of cartridge sizes! Check out the below EP Integrations welcome video of the EP 2.0 annealer where we cover topics of unboxing (so you don't damage the drum), overview and why the EP 2.0 annealer is the BEST brass annealer for the precision reloader (and even those new to reloading / annealing because it's simply easy to use), and then finish with actually annealing some 6.5 creedmoor brass. ANYONE CAN ANNEAL! It's very easy! See video below here:
don't for get to subscribe, like, share, & hit that notification bell ALL for more future videos yet to come! Link to our youtube channel here: